Article Archive Details
Hendon Publishing

Paratech Modular Battering Ram

The Modular Battering Ram (MBR) is the latest addition to Paratech’s Tactical Forcible Entry line.

The MBR body is designed to receive three different impact heads. It is also designed to accept a coupler, which accepts another MBR body to make a a two-operator unit.

The Paratech MBR comes with three quick-change ram heads. The Standard head is 6-inches in diameter. Importantly, the Standard head has a radiused, slightly domed impact surface. In reality, operators seldom hit the door with the ram head perfectly flat against the door. This means the force from an ordinary flat-head ram gets transferred through just the edge of the head, just an edge contact. This more focused impact can crack or splinter a door, instead of spreading the force out to the lock or hinges.

The rounded, radiused Paratech MBR head accounts for the slight off-angle of the operator’s impact. Even if the incoming swing of the ram is at an angle, the MBR head still impacts over a wider surface, an “area” instead of a “line.” The 6-inch mushroom-shaped head is less likely to penetrate and get stuck than a smaller diameter head. This impact spread over a larger area makes the MBR more angle-tolerant, mistake-proof, user-friendly. The Ball head has a perfect ball shape. This is the head to use when the operator wants to concentrate the impact energy over a smaller area.

The Ball head is the right choice for breaking glass block, wire-reinforced plate glass, hurricane glass, or other odd shaped or even objects. In addition to a more concentrated force, the Ball head also allows a more location-precise impact. The Cone head has a sharp, wedge-profile point. This steeply angled point is designed to concentrate the impact energy on one small spot. This is the head to use when striking concrete block, brick, metal or wooden boards. The point penetration may allow the insertion of chemical agents, or the fulcrum of an entry tool, or be the first step to continue to crack or splinter your way into the structure.

The pointed Cone head also works extremely well against difficult glass. The same diameter as the 3.5-inch ram body, the Ball and Cone heads simply cannot get stuck inside the structure after impact.
The removable coupler, of course, connects one MBR body to another. It can remain in the end of the single ram body to increase the impact force. The coupler itself weighs 7.5-pounds. Or be removed to lighten the carrying weight. Or it can deleted from the MBR kit altogether to lower the purchase price.

The Paratech MBR with the Standard head on one end and the coupler on the other – the typical condition – weighs 34.5-pounds. The ram body is machined from 6000-series “aircraft” aluminum. The heads and coupler are made from “leaded” steel.

The steel handles are solid and rigid – made of steel flat stock. By loosening a knurled lock collar, each handle can be rotated to one of five settings to accommodate individual comfort, multiple-operator use, or storage needs. Each handle can be positioned separately: one knuckle guard up, both guards up, handles separated the most for an optimal center of gravity, handles close together for tight spaces.

One of the best features of the Paratech MBR is the knuckle guards: steel flat stock protectors on the outside edge of each handle surrounding the grips. Each handle has a medium-durometer foam covering the grip. The medium foam allows an extremely firm grip and gives better precision to the impact strike than smooth steel or hard plastic or rubber. The Paratech MBR with one body, three heads and a coupler has an MSRP of $1200. The minimum setup, the body with the Standard head, has an MSRP of $750. The TFE Backpack designed for the ram, bolt cutters and Halligan tool, has an MSRP of $245.

Published in Law and Order, Dec 2011

Rating : Not Yet Rated

Related Products



No Comments

Related Companies

Article Images

Click to enlarge images.

Close ...